Log in

View Full Version : A crack in 3 toilet commode bowls (Crane)


EL9
Oct 30, 2008, 07:23 PM
Hi,
We had three Crane toilet tanks replaced because they were defective. I happened to see an ad in the paper about the replacement option due to some lawsuit (I live in B.C. Canada). This was about 5 years ago.

In the last few days I noticed that a crack was developing on the upper left side of the commode bowl (close to the tank) and was swinging around the back and descending down the right side of the bowl. It is a hairline fracture but it is moving.

I then inspected the other two toilets and sure enough, they have a crack (hairline) all starting around the same place... on the upper left and curving around the back but not as far as the 1st one.

Do you know if the crack that I am describing will cause a leak? Would there be a bowl that is compatible with the tank (tank has t00-15A inscribed inside) that we could get if we need too?

I e-mailed Crane in Canada and I got this response:
> The bowls are not covered under this tank program. Sorry, but we cannot help
> you further.
>
>Any advice please?
> Thanks,
> Eileen
>
PS Bowls have these numbers 19039063, 17019045, C2029070 or it could be
02029070)?

Milo Dolezal
Oct 30, 2008, 11:11 PM
First, Yes, the toilet will leak either externally or internally. Second, I would be very careful using those toilets: They crack and fall apart under pressure in a fraction of a second. You won't have time to respond while falling down on pile of china with your pants down (... it was not meant to be a joke... )

Tanks are usually made for one of two model toilets and are almost never compatible with others. Why not to buy new toilet - good one: Kohler Wellworth Lite: Home Depot $119.00 ?