dclynch
May 29, 2006, 06:55 AM
Tom - This is a real amateur question, but I can't seem to find the answer in my books.
I'm installing a pedestal sink in profile opposite the bath door and need to connection to look good. The drain line is 2" PVC . I have a 1.5" chrome trap and can't figure out how to attach it to the drain pipe. Nothing is set up yet, so I have complete flexibility.
Questions are:
1) What exactly should be at the end of the rough in? The 2" pipe?
2) How far should the rough in protrude from the finish wall?
3) How do I attach the chrome trap arm to the PVC rough in so that I can cover the joint with a chrome escutcheon?
Thanks in advance.
Dennis
I'm installing a pedestal sink in profile opposite the bath door and need to connection to look good. The drain line is 2" PVC . I have a 1.5" chrome trap and can't figure out how to attach it to the drain pipe. Nothing is set up yet, so I have complete flexibility.
Questions are:
1) What exactly should be at the end of the rough in? The 2" pipe?
2) How far should the rough in protrude from the finish wall?
3) How do I attach the chrome trap arm to the PVC rough in so that I can cover the joint with a chrome escutcheon?
Thanks in advance.
Dennis