I borrowed a weed eater from a friend of mine, and it's one where you have to pull the spool off to load the string. How do I load the string back in so I can continue weedeating my yard? The string I'm using is the right string for the weed eater, I just don't have a clue how to go about getting it in.

What I would do is go to the WEB site of the manufacturer. Look up the model and see if there is a diagram of the process for display or download. The process differs between modules. On the two that I have owned, the spool is pried off and the string pushed into a notch on the inside. The string is wound in the opposite direction that the spool spins, generally counter clockwise. The loose end is then threaded through a hole in the outside of the spool receptable as its pushed back in.

Yes, usually the little ones have a bump head that pops off, in the head a tiny hole to slip a little line in, and a arrow to show you which way to wind it. Which brand weeder is this though? Weedeater brand?

Thanks for your help. My lawn is now done!

Want to come do mine now? :D