I purchase a home that has a Airtemp Air Handler in the attic. The unit has to be completely rewired. I have the fan contact,it has wires at top(one green, one brown). I take it that this is the input voltage. It has 2 red wires coming out of the coil. I think these are 24V.

There is a 24V transformer(no wires connected). It has a green and red wire on the 24V side. On the input side there is a orange, black, white, red wire. The white and red are cut and capped off. The black and orange wires are for the input voltage from what I gather.

I have a wire coming from my thermostat and one going to my outside unit.

Also, there are 2 wires coming from the blower/fan.

I am a novice at this. Can someone help me in wiring this unit properly.

BTW, the primary voltage is 240 VAC.


Thanks in advance,:confused:
Madd

Any takers on this problem. I really need help. I live in Mississippi and it is starting to warm up.

Thanks again,
Madd