My truck is a 1985 dodge ram royal se with a 5.2L carbureted engine. My problem is that it won't spark.
I have installed brand new:
Distributor
Spark plugs
Spark plug wires
Ignition coil
And ignition control module

I shouldn't say that it won't spark actually because it will every once in a blue moon 10-20 turnovers of the engine( and that's one checking on the #1 cylinder)

Thank you for your time

. Check all under-hood and under-dash fuses with a test light or multimeter:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-46563-3.html#post252145

Be thorough or you'll end up wasting time and money.

. Check for codes.

. Check for power going from the ignition switch to the distributor. Turn the ignition switch ON. Measure voltage between BLK/YEL (+) terminal and body ground. There should be 12+ volts read. If not, repair open in BLK/YEL wire between the connector and ignition switch. Consider checking the ignition switch and harness for wear, pitting, or melting, if necessary.