I've got a 94 S10 Blazer that didn't pass insp this time mostly due to body rust. It's been sitting for a bit over a month. I went to try and start it. Experience told me that the battery would probably need charging (was old and occ needed it if I didn't go anywhere for several days). The charger read that battery full but I left it on for a couple hours anyway. When I tried to start it (stiil read full charge but I left chgr on 'quick start'), I get no readings on the dash - no elec at all. Doesn't take much to figure it's because it was sitting so long, but what should I look at first to get elec flowing again?




-

. Clean battery terminals and connections.

. Test all under-hood and under-dash fuses with a test light or multimeter:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-46563-3.html#post252145

. Check ignition switch and harness for wear, pitting, or melting.

You gave me a good place to start. I'll let you know what ather prob I find in a couple days and see if you can help <G> (but I'll check out those great posts you put up first).


-