Log in

View Full Version : Kenmore Dishwasher-Clean light blinking


mkmajors
Apr 13, 2008, 10:37 AM
Any idea how to reset the dishwasher? There are two buttons to push that will reset it, but I cannot remember what they are. HELP!

esquire1
Apr 13, 2008, 01:44 PM
Try pressing the heated wash then heated dry one after the other about 5 times. This should reset the unit.

janneb1
Dec 12, 2011, 05:10 PM
Thank you so much!

scott046
Nov 17, 2012, 04:49 AM
YES - Success - Alternate between the two buttons - Heated Dry and high temp - with the door open, start by pressing the Heated Dry once and then the High Temp button once and continue to alternated between the two until all the lights light up on the control board - then close the door and make sure it latches shut - - then hit the cancel button and all light should clear off - the unit is reset and should operate as normal