94 GMC Sierra 1500 5 speed
The problem: push clutch in, put in gear, let out clutch without touching the gas and it just sits there. If I keep giving it gas it will move after 30-60 seconds, but it does it going into every gear if I try to drive it down the road. Any help would be great.

Well, it could be the clutch disk but that would normally give you chatter on release. I'd suspect a binding slave cylinder that isn't releasing the clutch fork properly. A worn ball stud is another less likely possibility. They can get kind of pointy as they wear and since it's the pivot point, the clutch fork gets jammed. However, I'd start by checking out the slave cylinder.