Is there a reset switch on my whirlpool dryer model #LEQ8611LG0. It is not heating up.

No idnot not think there is but try re plugging it up

This site shows a good parts break down -- hope this helps you repair the problem

Whirlpool LEQ8611LG0 Parts List (http://www.partselect.com/ModelFrames.aspx?ModelID=581784&ModelNum=LEQ8611LG0&mfgModelNum=&ManufactureID=3&Selected=ZCS58VWG&Position=0&mfg=Whirlpool&Type=&Mark=0)

White-West, Frigidaire repair info, how does the dryer come apart, front flides and how to replace them (http://www.applianceaid.com/wwf-howto.html)

Section #1 parts #14 heating element -- part #47 or #48 Thermal Cutouts

Also check wiring and parts for signs of heat damage

If the element is not receiving power it is likely that one of the thermostats is defective. 220 volts power