How do I replace the door switch on my Kenmore 70 series washer mach?

See if you can find the image of your washer online.

Generally, I've found that you have to remove the front of the washer, and there are two screws on the right side after you open the lid. You may have to also open up the back, as that is usually where the wires for the switch hook up to the washer.

XenoSapien

Hope this helps -- Let us know

Appliantology (http://groups.msn.com/Appliantology/washers.msnw?action=ShowPhoto&PhotoID=283)

Fixitnow.com Samurai Appliance Repair Man: Appliance Repair Wisdom for the Ages: Mailbag: Opening a Whirlpool or Kenmore Direct Drive Washer (http://fixitnow.com/2003/08/mailbag-opening-whirlpool-or-kenmore.htm)