loghouse
Mar 9, 2008, 12:03 PM
I just had the vinyl liner replaced in my 16 x 32 inground pool and discovered a problem with the installation. In the corners near the steps the border printed on the liner is stretched to the point that is about 4 inches wider than the rest of the pool. We have also had the liner pull loose from the coping twice in two days since the install. It really looks awful but I am most concerned with the long term problems this may cause. The contractor originally said that it was a manufacturing defect and he agreed to call the manufacturer to see what they would do to correct the problem. Mfg. says there is no defect and the reason for the distortion of the border is from stretching.
The contractor then admitted that he measured wrong but said there is nothing wrong with the installation writing the distorted border off as a minor cosmetic defect. He offered $200 off the price under his wrinkle guarantee. I have heard and read that if a liner is not properly measured long term problems from excess stress in certain areas of the pool will lead to the liner pulling loose constantly and the liner not lasting as long as it should or could.
I am very hesitant to accept the $200 discount and need to know if this error in measuring will lead to future problems.
I would really appreciate any feedback on this problem.
thanks
Here are some photos of the pool
http://i268.photobucket.com/albums/jj40/loghouse_bucket/Pool%20Liner/PoolLiner002_edited.jpg
http://i268.photobucket.com/albums/jj40/loghouse_bucket/Pool%20Liner/PoolLiner007_edited.jpg
http://i268.photobucket.com/albums/jj40/loghouse_bucket/Pool%20Liner/PoolLiner008_edited.jpg
The contractor then admitted that he measured wrong but said there is nothing wrong with the installation writing the distorted border off as a minor cosmetic defect. He offered $200 off the price under his wrinkle guarantee. I have heard and read that if a liner is not properly measured long term problems from excess stress in certain areas of the pool will lead to the liner pulling loose constantly and the liner not lasting as long as it should or could.
I am very hesitant to accept the $200 discount and need to know if this error in measuring will lead to future problems.
I would really appreciate any feedback on this problem.
thanks
Here are some photos of the pool
http://i268.photobucket.com/albums/jj40/loghouse_bucket/Pool%20Liner/PoolLiner002_edited.jpg
http://i268.photobucket.com/albums/jj40/loghouse_bucket/Pool%20Liner/PoolLiner007_edited.jpg
http://i268.photobucket.com/albums/jj40/loghouse_bucket/Pool%20Liner/PoolLiner008_edited.jpg