Log in

View Full Version : Wiring for my digital thermostat


antlrz
Feb 24, 2008, 02:44 PM
I have a hunter 44155c hunter thermostat and it hasn't worked right since I've had it I don't think its hooked up right . I have 5 wires , coming out of the brown wire is a red,green and white wire, and coming out of the white is a red and a white wire, I hope this makes since, something isn't right here, I just had to get a new induser motor because my furnace would never kick off aoutmatically. It would feel like 100 degrees in here and my stat would say 69, then as soon as you kick off the stat the temp on the screen will gradually go up. I need help in wiring this thing right its curently wired as such, the 3 wires coming out of the brown are green wire to G red wire to RH with a jumper from RH to RC and the white wire to W/B. now the 2 wires coming out of the white are the white wire is connected to nothing and the red wire to Y1. Please help I don't know what's wrong here

antlrz
Feb 24, 2008, 03:08 PM
Let me simplify here, I have four wires here, a red,green,white and yellow,I have a jumper from RC to RH with the red hooked to RH I have the green hooked to Gthe white hooked to W/b and the yellow hooked to Y1, and as stated above, something's not right or this is a cheap thermo, pay for what you get, anybody else having any problems with this model?

hvac1000
Feb 24, 2008, 05:26 PM
Hunter thermostats are junk. Get a good Honeywell thermostat.