View Full Version : Roll roofing on flat shed roof
RRose
Feb 4, 2008, 11:33 AM
The only option I am finding locally for the roll roofing material has the granules all the way to both edges. I am familiar with the kind that has a 2-inch selvage edge. How does one apply the type where there is no selvage edge? Do I still overlap at the 2-inches from row to row?
KISS
Feb 4, 2008, 05:27 PM
It took me a long time to find this when I did a small shed this summer.
http://www.usace.army.mil/publications/armytm/tm5-617/chap6.pdf
Seems like when using granules that cover the whole surface, your supposed to use exposed nails. (yuk!).
Consider an ice and water underlayment like weatherlock G or Grace Ice and Water Shield. Lowe's has the former.
GAFMASTER
Feb 14, 2008, 08:01 PM
The only option I am finding locally for the roll roofing material has the granules all the way to both edges. I am familiar with the kind that has a 2-inch selvage edge. How does one apply the type where there is no selvage edge? Do I still overlap at the 2-inches from row to row?
Or you can look for a peel and stick roll roofing product. Use with a peel n stick base sheet or if you prefer, use a nailable base sheet then use peel n stick cap sheet on top. One product to use in particular would be GAF/ELK Liberty Peel n stick. Use in temperatures above 40. Consult application instruction that can be found on their web site.
KBC
Feb 19, 2008, 09:18 AM
The only option I am finding locally for the roll roofing material has the granules all the way to both edges. I am familiar with the kind that has a 2-inch selvage edge. How does one apply the type where there is no selvage edge? Do I still overlap at the 2-inches from row to row?
I have used this product in the past(20 years or so) and we had to
1) adhere the underside with adhesive
2) nail the top 2-3 inch under lap
3) apply roof cement to the entire seam overlapped by the next layer.
Today I use a torch down method and melt the materials to a fiberglass underlayment.
KBC
KISS
Feb 19, 2008, 09:50 AM
What I did:
Pt down Wealerlock G and ice and water shied.
I then got a rool of roof starter material. Nailied it down on the edges. It's basically roofing with no granules about 10" wide and come in about 34' lengths.
That was nailed on the edges. Now you can use roofing cement for everything including the laps. The laps would have granuals, but it looks nice.