How do u fix a squeaky dryer?

The dryer has a drum that turns -- and spins the clothes. There is a shaft on the back

Of the drum that rides in a bearing -- the front rim of the drum rides on a wear strip --

Usually has a piece of plastic it glides on. The rear bearing kit needs to be replaced

( REAR DRUM BEARING KIT ) and the wear strip probably needs replaced. Not all

Dryers have a REAR DRUM BEARING some ride on rollers -- small wheels

What this means is the dryer needs to be tore apart and the drum removed to replace

The rear bearing -- plus the wear strip probably needs replaced -- this takes time as

It is glued in place and needs to be clamped in place and allowed to dry... Then comes

The hard part -- reassembling the dryer -- putting the drum back in is not that hard --

But getting the drive belt back on can be a bear -- tight spot and trying to put tensioner

In place is no picnic... Probably comes apart easier than it goes back together...

Most appliance stores have parts or can get them -- give them name and model

Without knowing dryer brand and model can not tell you what parts you need


REAR DRUM BEARING KIT?? Or Rollers --- Also need wear strip to support front of drum