Log in

View Full Version : Well Pressure Tank


Sparksfarm1
Dec 3, 2007, 03:27 PM
Ok... here's the question:

I shut the main water valve off so I could work on replacing the washer hoses. Did the work, turned the water back on and now I have nothing!

We tried knocking on the tank... nothing. We emptied some of the water from the tank... nothing. All electrical is OK and was not touched...

Anyone?

Thanks,

Dean Sparks

jlisenbe
Dec 3, 2007, 05:18 PM
Ok.....here's the question:

I shut the main water valve off so I could work on replacing the washer hoses. Did the work, turned the water back on and now I have nothing!

We tried knocking on the tank...nothing. We emptied some of the water from the tank....nothing. All electrical is ok and was not touched......

Anyone?

Thanks,

Dean Sparks
Well, it would seem the pump is not cutting in. Is the switch cutting the pump on?

speedball1
Dec 4, 2007, 06:10 AM
All electrical is OK and was not touched...
Are you saying the pump control contacts are closed and the pumps running dry or does the pump not run at all?