Log in

View Full Version : Natural gas floor furnace pilot okay, but no heat.


heatseeker
Nov 19, 2007, 12:32 PM
Have standing-pilot floor furnace with manually-set Honeywell thermostat. Heat won't come on. Pilot light is burning okay. No sound at all when thermostat is turned up. No clicks, nothing. Should I replace thermostat first? Does it seem more likely to need a new thermocoupler?

wmproop
Nov 19, 2007, 05:17 PM
The 2 thermostat wire going to stat,, take the loose from stat and tie then together,therefore bypassing the stat, does the furnace then fire up?if so its prob your thermostst. If furnace doesn`t fire up start with where the stat wires hook to gas valve and make sure of good connection. The old milivolt gas valves are simple but can be a headache, with stat hooked back up and calling for heat sometimes a couple light tape on the gas valve will wake it up,, try and let us know,

heatseeker
Nov 19, 2007, 05:23 PM
Thankful for very specific response with clear instructions about fixing problem.

LARRYFUNCHESSR
Sep 15, 2008, 05:23 PM
Have standing-pilot floor furnace with manually-set Honeywell thermostat. Heat won't come on. Pilot light is burning okay. No sound at all when thermostat is turned up. No clicks, nothing. Should I replace thermostat first? Does it seem more likely to need a new thermocoupler?
WANT DO THINK IS THE PROMBLEM

LARRYFUNCHESSR
Sep 15, 2008, 05:24 PM
Floor Furnace Pilot Works But Burner Does Not Come On

wmproop
Sep 15, 2008, 05:30 PM
Floor Furnace Pilot Works But Burner Does Not Come On



Did you follow the same advice that was given heatseeker, try it ,will determine if you have a bad tstat,then look for the 2nd step