View Full Version : Ceilin fan speed switch with 8 wire connections
 
 123mmb
Nov 3, 2007, 04:14 PM
How to connect a fan switch with 8 feed-in correctly if previous owner had wired incorrectly?  
 
I could not find any information that could help me so far. 
 
I have been experimenting with the wires but I am afraid I might hurt the box with 5 wires that is obviously important.:confused:
 donf
Nov 4, 2007, 01:14 PM
123,
 
Talk about needing help, What is the make and model of the fan.  I suspect that the box you see is for a remote control.  How is power brought the fan?
 123mmb
Nov 4, 2007, 09:15 PM
11/04/2007
 
Hi There!  
 
I messed with the fan until 1am trying to figure it out.  
 
There are no MGF labels on the fan body and no serial #s but I think it might be a Home Depot Hamilton Bay flush mount 52" 5 blade fan with a light kit.
 
There are 5 wires coming out from the little blake circ. Box Pink is pigtailed to the forward or backward switch only.  All black box wires have connections to the forw/back switch.  The Colors are Pink, Yellow, Orange, Grey, and Purple.  Yellow is pigtailed with one to the forwd/back switch and two tin tipped connections for the fan switch.  All other colors are one pigtail w/ tin tip for the switch.  Looks like the live Black wire was pigtailed with tin for 2 connections to the switch.
 
I stared experimenting (VERY CAREFULLY) with the usual combinations and I continued switching around until I got the fan blades to move in some way. 
 
Since I could only find 3 or 4 wired instructions I tried to match those patters of color with mixed results.  Some times I thought I smelled burning and I changed things around many times.  What I ended up with is 
First position L top Orange, bottom Black. 
 1 top Black, Bottom Yellow,
2 Top Yellow, Bottom Grey, 
3 Top nothing, Bottom Purple.
 
I have a functioning fan that starts with Low, then High,and then Medium speeds.  I am not going to try anymore patterns unless someone is sure what it should be.  I'm just happy to have more than one speed! :D
 ceilingfanrepair
Nov 6, 2007, 08:36 PM
There is no way to confirm the wiring for sure unless I can identify the fan.  Sounds like you did good.
 
Ceiling fan pull chain replacement and repair - Ceiling Fans N More (http://www.ceiling-fans-n-more.com/ceiling-fan-pullchain-replacement-and-repair.php)