pappupager
Oct 28, 2007, 11:49 AM
I want to know the CABLING procedure to connect a Computer/Computer's via LAN cable end-to-end to a SWITCH or HUB
greymars
Oct 28, 2007, 11:59 AM
for a comp to comp lan you're going to need an rj45 twisted cable
for the comp to switch/hub u'll need a direct ( not twisted ) rj45 cable
if you're going to make your own cables her's the pin shemas
twisted : 1-> 3 and 2 -> 6
normal ! : normal ^_^
good luck
ScottGem
Oct 28, 2007, 01:06 PM
You need to define what you want more clearly. Are you looking tomake your own cable. Connect 2 PCs together? Connect PCs to a LAN or what?