I just purchase a home and the dishwasher is a Kenmore 665. The dishwasher was running and someone turned off the circuit breaker (the dishwasher stopped). When the circuit breaker was put back on the dishwasher will not start. I don't have the manual and can't figure out how to get the dishwasher started again.

1) most dishwashers have a way of cutting the current to them - usually it looks like a light switch along your counter top splash board - close and turn on your dishwasher and start flipping what looks like the light swithes.
2) see if there is a pause or stop cycle button on the dishwasher control panel and reset that, if there is one - usually depressing it or hitting the start button will take care of that.

About I know how to do. Anything more is probably require a service guy/gal.

Best of luck,
Rate if helpful, thanks!