View Full Version : Poulan drive belt replacement.
runningtime
Sep 14, 2007, 07:00 AM
I am wondering if you could send me a picture containing drive belt replacement of a poulan 14.5hp, 42 inch cut lawn mower. Thank you
ballengerb1
Sep 14, 2007, 08:02 AM
I don't have a pic but there should be a belt diagram on the mower deck. You have 2 more pulleys than you have blades. One pulley for each blade, an idler and a spring loaded tensioner pulley. To get the belt on you need to disengage the belt drive and pull back on the tensioner, sometimes a two man job.
MOWERMAN2468
Sep 14, 2007, 06:55 PM
Sorry, but I do not know of a way to send pictures on here.
nauticalstar420
Sep 14, 2007, 07:06 PM
sorry, but i do not know of a way to send pictures on here.
Go down to the "quick reply" box and click "advanced". At the top there should be a little paperclip. Click on that and upload the pic as an attatchment.
I would send it myself but I couldn't find the diagram the OP wanted.
esquire1
Sep 15, 2007, 05:42 AM
Nauticalstar420, I've tried to do this, but it never works.
nauticalstar420
Sep 15, 2007, 10:48 AM
Nauticalstar420, I've tried to do this, but it never works.
There is a limit on the size of a pic you can post. Do you keep getting the message that its too big? I've always had good luck with pics I've pulled off the internet, it's the pics I take with my own camera that I usually have trouble with.
esquire1
Sep 15, 2007, 11:07 AM
Not too big, it always says upload not successful.
MOWERMAN2468
Sep 15, 2007, 02:35 PM
I will try this sometime nautical star, maybe it will work.