Log in

View Full Version : Kenmore Elite HE3t Washer Model#110-42922-202


Taxgoddess
Aug 12, 2007, 08:15 AM
:confused: Washer will not spin out. Is grabbing clothes and ripping holes in them. Drum looks to be out of alignment with seal. Have tried rinse/spin cycle which worked first couple of times but, now starts to fill then makes a buzzing noise as if something is not engaging. Drain/spin cycle will drain but not spin. Have a son who is a bedwetter need immediate assistance ASAP if possible with this problem. I am mechanically inclined thanks to my father....so I can read schematics and understand DIY repair instructions. Thank You in advance for your suggestions/remedies.

esquire1
Aug 12, 2007, 08:44 AM
Check and make sure the 2 tub ring clips are not broke. They are located at about 5 o'clock and 7 o'clock. Then ceck the tub snubber located at about 1 o'clock. These keep the tub in align. You may also want to look at the coupler located between the motor an transmission. It may be damaged or broke. Good Luck

Honest Abe
Aug 21, 2007, 09:28 PM
Kenmore Elite he3t will not spin or wash all the lights are on what could likely be the problems and what troubleshooting should I do on it.

doutbl
Sep 27, 2010, 01:36 PM
Kenmore Elite he3t will not spin or wash all the lights are on what could likely be the problems and what troubleshooting should I do on it. F21 ERROR CODE.

doutbl
Sep 27, 2010, 01:39 PM
Kenmore Elite he3t will not spin or wash all the lights are on what could likely be the problems and what troubleshooting should I do on it. F21 error code. What dose this mean.