Log in

View Full Version : Re-setting Arc Fault Breaker


Hocky
Jul 8, 2007, 07:01 PM
After an electrical storm where elec service was interupted I can not re-set the two Bedroom Arc Fault Breakers. Breakers are mfd by Eaton & has small yellow test button on each. Says type BYAF. All else is well. Home is 1 year old in Florida. Please help.

tkrussell
Jul 9, 2007, 01:48 AM
I suspect the breaker is defective and needs to be replaced. The unit contains electronic parts that can be easily damaged.

Stratmando
Jul 9, 2007, 06:33 AM
I would remove wires out of breaker, and see if it will reset.