arizona
Jun 30, 2007, 09:09 PM
I am remodeling my bathroom and want to put 12x12 ceramic tiles on the floor and walls.
The plaster walls had old plastic tiles from the 50's. I removed the plastic tiles and now there is a layer of adhesive with trowel marks. For the most part it is fairly even, however, in some spots the adhesive came off completely. I really don't want to replace the wall, is there something I can use that will stick to the existing adhesive, be a little forgiving of "divits" and have the strength to hold a 12x12 tile? Or is there something I can do to the wall... without removing it?
The plaster walls had old plastic tiles from the 50's. I removed the plastic tiles and now there is a layer of adhesive with trowel marks. For the most part it is fairly even, however, in some spots the adhesive came off completely. I really don't want to replace the wall, is there something I can use that will stick to the existing adhesive, be a little forgiving of "divits" and have the strength to hold a 12x12 tile? Or is there something I can do to the wall... without removing it?