I have a used Whirlpool Microwave/micro-hood model MH6150XHQ-0 with no installation instructions or hardware other than the 2 screws for the attachment to the overhead cabinets. I need to know how to install this appliance and is there other mounting hardware I need to find?

Yes, there is a mounting bracket you need. Find your closest appliance parts store and the will show you a diagram.
Pipemaster17

I have a used Whirlpool Microwave/micro-hood model MH6150XHQ-0 with no installation instructions or hardware other than the 2 screws for the attachment to the overhead cabinets. I need to know how to install this appliance and is there other mounting hardware I need to find?
I went to Sears.com, clicked on parts, entered your model number, found this parts list and diagram. I didn't look at the diagram or parts list thoroughly but you might want to as sometimes there may also be a template which is simply a piece of paper with locations indicated where you attach the microhood, where the holes shouild be drilled, etc. I am not saying the template is necessary, it's just a very useful tool. Hope this helps you.




Model MICRO OVEN/HOOD COMBO - MH6150XHQ0 (INSTALLATION)

Part Description Part
Number Diagram
Reference
Number Quantity
EXHAUST ADAPTER 4158541 1

EXHAUST DAMPER 4158319 2

TOGGLE BOLT/WINGS 4158321 3

TOGGLE WING 4158326 4

SCREW 4158323 5

SCREW 4158315 6

WASHER 4158314 7

PLATE, MOUNTING WING 4358924 8

CLAMP 4358011 9

BUSHING 4358012 10

SHEET-TOP CABINET TEMPLATE 4359560 11

SHEET-WALL TEMPLATE 4359011 12

SCREW 4358381 13

SCREW 4358010 15

PIN, LOCKING 4358933 16

SEALER, INSTALLATION HARDWARE 4358404 None

SEALER, SILASTIC (3 OZ.) 482338