Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
3-amp fuse on circuit board
[ 7 Answers ]
I've been having an intermittant problem where the 3-amp fuse on the circuit board keeps burning out. Lately, the problem has occurred in the late afternoon (3-7pm) such that when I replace the fuse, it will last for 3-4 minutes before blowing again. If I wait until late in the evening to turn on...
Air conditioner keeps blowing fuse in circuit board
[ 5 Answers ]
Hello, I Am Having A Problem With My Carrier Weathermaker 8000 Air Conditioning. It Keeps Blowing The Fuse In The Circuit Board Inside The Furnace Unit. Yesterday I Checked The Wiring Inside The Thermostat Tightened A Couple Of Wires And The Unit Started ( Yea) But It Ran Continuously For...
Replacing fuse box with Circuit breaker panel
[ 3 Answers ]
I want to replace an old fuse box with a circuit breaker panel. Do I need a 200 AMP service? (considering putting in air conditioning in the future). The house has two apartments so I want to make sure there is adequate service. As I know absolutely nothing about this, what questions should I...
Fuse to circuit
[ 10 Answers ]
I have a 60 amp fuse box it has 6 s type fuses all say 30 amp, I believe these should have been different values. 2 of 6 of these fuse slots don't work, so the previous owner just doubled up the lines on the fuses that work. This is a mobile home with an adition which is tied to the pwer where...
When converting a fuse box to a circuit breaker
[ 2 Answers ]
Is it legal to feed a circuit breaker through a fuse box as long as the fuse can handle the load? View more questions Search
|