Ask Experts Questions for FREE Help !
Ask
    joecline's Avatar
    joecline Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 10, 2012, 03:40 PM
    2006 troy-bilt super bronco manual and diagram
    I have just replaced a small drive belt,now when I go to give it gas,the gas pedel just doesn't want to move.After l take a closer look I seen that there is a spring missing that controls the speed pedal,what is it that is missing how big of a spring in length , etc..
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Jul 8, 2012, 05:38 PM
    Hi,
    Please furnish the 9 -11 character alphanumeric model from under the seat.
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy-Bilt Super Bronco 13AX60TG766 [ 2 Answers ]

Does anyone have a maintenance manual available for subject riding mower? Our RC club mower's drive pedal is now extremely hard to push down all the way. A helpful user on another forum suggested it may be the variable speed pulley hanging up. He offered advice on how to check this by removing...

Troy bilt super BRONCO wiring diagram? [ 1 Answers ]

Where can I get a wiring diagram for a 2006 model super bronco troybilt mower?

Troy bilt super bronco [ 1 Answers ]

On my mower the steering wheel just keeps turning and the wheels don't turn. From reading other posts it looks like I may need to replace the hex flange bearing, but I cannot get the stupid nut and pinion gear off to do so.. please and help is greatly appreciated

Troy-bilt Super Bronco will not start [ 0 Answers ]

I have a model 13AT609G766 Super Bronco with a 21.0hpv twin it will not start, I had it running and when I pushed the lever to start the mower blades it died now it won't start. Can anyone help me, it will start if I spray starting fluid on the air filter but it dies after it burns off the starting...

Troy Bilt Super Bronco [ 1 Answers ]

Looking for a diagram of a Super Bronco deck. Had to replace a tension spring but don't think is in the correct place. The diagram in the manual isn't too clear on the springs placement. The belt is very loose and doesn't have the cutting power it used to.


View more questions Search