Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Swapping Dual Light Switch for Dimmer/Three Position Switch for Ceiling Fan
[ 1 Answers ]
I am trying to swap out a dual switch for a switch that has a dimmer for the ceiling fan light and a three position switch to control the fan. The original wiring had white to white on switch, black to black on switch, and one black from light connected to the top switch pole and the other black...
Trying to wire ceiling fan switch and 2-3way light switches for ceiling lht/fan combo
[ 5 Answers ]
I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....
Two switch Ceiling Fan and Ceiling Fan light
[ 2 Answers ]
I have two on and off swtich one use to control the ceiling fan and another one use to control ceiling fan light. Handy man changes the ceilng fan light. I wasn't home and wifey paid him without checking what going on Now both the switch either turn off the entire thing or turn on the entire...
Ceiling Fan-One switch, ceiling, 3 white, 3 black, red
[ 5 Answers ]
I have a ceiling fan I am replacing. There is one wall switch. In the ceiling there is 3 black wires connected together, 3 white together and a red. I didn't notice any other wires and evidently, wrongly assumed the red was a ground. I connected the fan black and blue to the ceiling black and...
Wiring ceiling fan switch and light switch
[ 1 Answers ]
I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and... View more questions Search
|