Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to wire a single phase heater with 3 phase
[ 4 Answers ]
I have a single phase 238-240v air handler with 15 kw(3 - 5kw strips) of heat strips. I want to wire this with 3 ph 208 wye. Can I change the wiring to this: L1 ~~~H1~~~L2 / L3 ~~~H2~~~L1 / L2~~~H3~~~L3. Then send L1 & L2 to the 240 system fan for a single phase fan motor. This Should give me a...
60 AMP feeder line to meter and from meter is 200 AMP wire to my electrical box.
[ 13 Answers ]
I have a old 60 AMP feeder line from the top of my house to the meter. From the meter is 200 AMP new wire. I was wondering if this is even safe and what would the cost be of updating the feeder line?
Pl explain 3 phase energy meter working principle and how can reduce electric cost
[ 1 Answers ]
I hope the energy meter will consider only the amount of current flow in case if I improve p.f. And reduce the current flow in mains circuit,is it will help to reduce my electricity bill, and reducing produce heat, loss of electricity. Kindly pardon my english.thanks
Wire a 3phase welder with 1phase power ?
[ 2 Answers ]
Have heard this can be done but wanted to get some help. Have a three phase welder and wondered if I can directly wire a single phase line to it? I realize I would loose 66% of the out put which is fine but just wanted to know if it can be done. If so were do I put the single phase lines to? There... View more questions Search
|