Not your question?
Ask your question
View similar questions
Check out some similar questions!
Wiring for 220VAC - 30 Amp Motor
[ 5 Answers ]
When doing the wiring in my new garage addition, I planned for a future two post cars lift. I failed to adequately check out the power requirement for said lift. I ran 3-#12 wire+ground wire from the sub-panel to the site about 30 ft away. Now I find that on all the lifts (so far) available, they...
Single phase motor
[ 1 Answers ]
A washing machine is driven by a single phase fractional motor. What makes it run reverse foreword?
Wiring my garage for a 230 VAC single phase welder
[ 3 Answers ]
I am trying to wire a 220 outlet for my 230VAC single phase welder in my garage I have a 60a double breaker is it as simple as black and white w/ red stripe wires to breaker and green to ground? Thanks for any help
208v single phase wiring
[ 1 Answers ]
How do I connect a 208v single phase appliance to my home circuit panel? I installed a 30amp breaker which has 2 connections, red and black (hot), then I have white (neutral), and green for ground. The device only as 2 connectors not 3, plus ground? Thanks
120v/208v single phase appliance wiring
[ 2 Answers ]
Recently purchased a coffee machine that has the above reqts. I understand that it has 220 and 110v circuits that need power. I also purchased a generator to power this brewer outside. If I use a NEMA L14-30P plug, to connect into the generator, What is the sequence of wiring for the plug three... View more questions Search
|