Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
PVC or Metal conduit into a subpanel?
[ 4 Answers ]
Hello, I'm installing a 200 amp subpanel in my barn, and am using 2" PVC conduit (buried) from the house. As I was going into the barn, I got to thinking that perhaps metal should be used above ground (in the wall feeding the panel). I would prefer to use the 2" PVC, all the way, but was...
3 wire plus metal conduit as a ground for a range
[ 4 Answers ]
I am installing a new range. I have a three wires coming out of a metal conduit which is properly connected to a 60 amp breaker. I have a three wire cord and a grounded surface mounted outlet. I assume that the ground will connect through the metal conduit. THis will ground the outlet. How do I...
Can I put 4 12-2 romex in 1 2 inch plastic conduit
[ 1 Answers ]
Hi, I am running new branch lines to another part of the house. They will pass vertically through a hallway, then on to new area (in walls) Can I protect four 12-2 branch lines in 1 large pvc conduit. Thanks
What size metal conduit should I use?
[ 2 Answers ]
I have a cable 1.1 Inches in diameter. The National Electric Code says that a metal conduit cannot be filled more than 60%. It must have 40% of its space free. What size conduit should I use?
What wire to use underground and should I use conduit or plastic
[ 2 Answers ]
I'm wanting to run my wire underground to my garage and don't know what wire to use and don't know if I should use metal or plastic conduit View more questions Search
|