Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fan blade on my unit won't turn
[ 8 Answers ]
My fan blade on my central unit won't turn. It appears it is trying to turn, so I helped it with a screw driver. The fan blade then runs with out fail, but will not cool. I was told that it might be my capacitor? Why is it when the blade turns it won't blow cold air?
Bent fan motor blade
[ 1 Answers ]
Hey guys I have a rudd heat pump. Needed to change the motor . I had difficulty getting the fan blade off, so I took it to the local home improvement center to have the fan blade taken off with a puller. Now it seems like the heat pump is out of center when I start the motor it shakes like an...
Removing fan blow motor on central a/c
[ 1 Answers ]
How do I remove the fan motor from the fan wheel on a central a/c blower? Confused:
Draft Inducer won't start (it just hums unit I spin the fan blade)
[ 2 Answers ]
When thermostat asks for heat, the furnace won't start unless I physically give the fan blade on the draft inducer a spin. What can be causing this?
Removing Fan from Motor Shaft
[ 2 Answers ]
Does anyone out there know how to get the fan off the air conditioner condenser motor shaft? Mine seems to be rusted on a bit. I tried WD40 and a few lubricants but I don't want to ruin the shaft if I already haven't. What's the trick? I'm going to be getting a new motor in the mail and I need... View more questions Search
|