Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bryant furnace short cycling
[ 4 Answers ]
I have a Bryant 80 furnace , had the ignitor replaced in November. Since then the furnace will power up, ignitor and burners will go and then when the blower turns on the burners go out, the blower will go for about 90 seconds and then shut down. It will do this repeatedly sometimes as many as 30...
Bryant AC blower fan motor "quick" cycling
[ 11 Answers ]
While running in AC mode or fan ON mode the blower fan keeps cycling on/off contiuously for on off periods from less than a second to several minutes. I figured the motor was overheated (bad windings) so I replaced the motor and capacitor with poor results. It seems to run longer but contiues to...
Bryant furnace keeps cycling on
[ 2 Answers ]
I have a Bryant Legacy plus 90 furnace that is about 2 & 1/2 years old. The furnace will kick on and run till the temp on the thermostat is reached, it then shuts down but will immediately start back up again and continue to cycle like this 5 or 6 times until I adjust the thermostat down a degree...
Furnace cycling
[ 1 Answers ]
I have a Trane gas furnace w/no standing pilot it's electronic. Anyway when the t-stat calls for heat it will fire up and the shut of within 5 secs. It will do this approx. 4 times before it will eventually lock itself out and the blower will continue to run not ever reaching setpoint. I know...
Furnace off and on cycling
[ 1 Answers ]
We had an air bubble in the vacuum system, removed the clamp, blew in the tube, problem solved-thanks for everyone who looked! View more questions Search
|