Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cast iron shower drain in concrete floor-replacement
[ 7 Answers ]
Hello. This is my first post here and I'd appreciate any help you can provide. I have a tiled shower on a concrete slab. The drain is cast iron... sort of a bowl-shaped 3" dia. opening with a lead seal to a 2"-2 1/4" cast iron pipe. In removing the old "Premier" pull-up drain stopper, the brass...
Stumped on hooking up shower pan to 4" cast-iron-in-concrete floor drain?
[ 7 Answers ]
I ripped out the shower pan because water got under it and rotted some shims. This happened because the shower's 2" drain fitting was just loosely dumping the water into the 4" drain. I need to hook a shower pan to what looks like just a 4" cast iron floor drain. There is no flange or bell. I...
Cast Iron Drain Cover
[ 1 Answers ]
Hey everyone, I recently retiled my bathroom and the drain cover in the shower was broken. Unfortunately, it was also thrown out so I don't have a picture to show you. I have included a picture of the cast iron drain it covers. The outside diameter of the drain measures 4" and the two...
Replace 1.5" galvanized steel (male threads) to 4" cast iron stack
[ 1 Answers ]
I need to replace a drain line from an old double cast iron kitchen sink. The existing pipe is 1.5" galvanized steel which threads directly into female threads on a 4" cast iron stack. The male threads of the galvanized pipe broke off in the cast iron. I'm guessing the easiest solution is to...
Converting cast iron floor drain to shower drain
[ 3 Answers ]
I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent... View more questions Search
|