Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hot water heater as a holding tank for furnace
[ 2 Answers ]
I frequently run out of hot water in the shower. I have a furnace that heats the water directly. My question is; Can I use a hot water heater as a holding tank, so I don't run out of hot water? If so what do I need to complete this task?
Water pressure against tank height and tank water capacity
[ 5 Answers ]
Normally the head pressure of water is .433 pounds per foot of head. Is there any change in pressure by changing the tank water capacity. e.g. if two tanks of 50ft height having water capacity of one is 10,000 gallons and other one has 20,000 gallons. What will be the water pressure difference...
Sewage pump clogs in holding tank
[ 1 Answers ]
We have two new SK60 submersible sewage ejector pumps in our holding tank at a 28 room motel and they keep clogging up with things like plastic bags, string etc. . What can I do to prevent this?
Well pump takes 5 minutes to fill bladder holding tank
[ 12 Answers ]
Last year we installed a new bladder holding tank. Pressure set at about 27 lb since pump turns on at 30LB. After installation pump was running a long time to fill pressure tank. If drawing water from multiple sources at one time once pressure dropped and pump went on it could not supply enough...
Septic holding tank manhole adjustment
[ 3 Answers ]
Hello, I had my house built last year and the septic system is a sand mound system with 3 holding tanks between my house and the sand mound. The holding tanks are concrete and each have an access (manhole) that sticks about 1' out of the ground. I have read on other sites about access being... View more questions Search
|