Ask Experts Questions for FREE Help !
Ask
    markodevil3's Avatar
    markodevil3 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 20, 2008, 02:19 PM
    Solenoid to engine
    Changed engines in riding mower 15 hp briggs to 12.5 briggs the wireharness are a lot different 1 black wire in the front 1 orange and 1 red wire in the back I also changed the solenoid I hooked the battery wire up and the wire to solenoid but I have these extra wires I know what the lights wire are I also hooked a black and a white wire to the ground on solenoid is there a way to skip the safety wires what wires do I need to start the engine
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Jul 22, 2008, 10:31 AM
    After reading in circles, no don't skip any safety wires.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My 16 hp vanguard engine made a terrible racket inside the engine no longer runs, why [ 2 Answers ]

Mower was running fine, started making a noise inside engine, lost power, noise returned, and engine died. No longer will start, just spins. Is the engine trashed or possibly fixable?

Impossible of change v6 engine to EX engine in honda 1997 model [ 1 Answers ]

Is it possible to change v6 engine in honda 1997 model Ex engine (V-TEC) and what are the possible components that will change

Solenoid [ 1 Answers ]

How To Test A Solenoid For A Lawn Tractor

Is a1998 ford escort 2.0l 4 cyl. Engine a interference engine or not? [ 3 Answers ]

I broke my timing belt last week. I have a '98 Escort w/a 2.0L 4 cyl. Engine. The shop where it got towed to says that it's an interference engine. First off, I called my nephew in NH who has been a mechanic for the past 18 years & he said it's not an interference model. I then checked out The...


View more questions Search