Ask Experts Questions for FREE Help !
Ask
    slowpoke123's Avatar
    slowpoke123 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 16, 2008, 10:31 AM
    Wiring solenoid for a murray rider
    Replaced solenoid for my murray rider and forgot how the wiring goes.. 3 post dual mount...
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Mar 16, 2008, 11:27 AM
    If you have two large post and one small male blade connector, which is what I think you have, the post to the left when holding the solenoid when all connections are visible to you, hook the battery + cable to the one on the left, the other cable to the right that goes to the starter, then the small either red, or yellow wire that has a fuse in line and runs to the ignition switch to the male blade connection.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray rider will not start [ 6 Answers ]

I have an older Murray 12hp riding mower that has not had a problem starting until now. It started fine and I mowed and shut it down, when I went to restart the mower it would not do anything. I have replaced the starter silinoid, switch and checked all the safety switched and still nothing. I...

Murray rider won't start [ 3 Answers ]

Have a 2001 Murray, with a 12hp B&S last year we were mowing and shut it off to get a cold drink when we came back out it would not start, Battery is fully charged yet it does not crank I feel it could be one of three things but could use some advise. The starter safety switch on the seat , the...

How to rehook solenoid on Murray Lawnmower [ 1 Answers ]

I have a Murray Riding Lawn Mower. It was given to me and it won't start. They replaced solenoid and wanted to make sure how it is supposed to be hooked up. The model # is 52100x92a

View more questions Search