Ask Experts Questions for FREE Help !
Ask
    cowboy022403's Avatar
    cowboy022403 Posts: 5, Reputation: 1
    New Member
     
    #1

    Apr 16, 2007, 08:40 AM
    Wiring on a 12.5 horsepower brigg and strattion engine on a murray.
    I just recently put a 12.5 horsepower B&S engine on my murray mower. The original Brigg. 12.5 motor slung a rod. So I put this one on there. It's a little older engine.it has 1wires (one red one) coming out from under the flywheel. And the other one has 2 wires one red and one white. What are these wires ? It will not start from the switch, but it I put jumper cables to the starter it will start. Any Ideas of what to do with the wires or what they do. Or what my problem is . Thanks brandon


    The engine I put on the mower model number is 281707 Type0195-01 Code:89013111



    The engine I took off the mower that is blown model number is 286707 Type: 0152-01
    Code: 95041940

Check out some similar questions!

12.5 horsepower brigg and strattion engine on a murray. [ 2 Answers ]

I just recently put a 12.5 horsepower B&S engine on my murray mower. The original Brigg. 12.5 motor slung a rod. So I put this one on there. It's a little older engine.it has 1wires (one red one) coming out from under the flywheel. And the other one has 2 wires one red and one white. What are...

Removing engine on murray riding mower [ 1 Answers ]

I have a Murray riding mower. The engine was vibrating and it took me awhile but found two screws missing. I put two back in but engine still vibrate. Further investigation showed that the holes in the engine plate had reemed out and the screws were not holding the engine steady. My question: I...

Murray wiring [ 1 Answers ]

Hi Folks, Would anyone happen to have or know I can get a wiring diagram for a Murray lawn tractor? Model Number: 46104x8b Thanks.

Murray 12.5 Commercial Mower - Briggs Engine - Won't Start/Turn [ 3 Answers ]

So I'm mowing my back yard with my Murray lawn tractor. I brought it back to the garage and parked it, went inside to cool off, and when I went back out to put it back into the garage, it wouldn't start. I turned the key, and got nothing. The lights work, the battery is charged to 100%,...

NEED HELP Replacing engine stop/control cable on Murray Lawnmower [ 1 Answers ]

THe cable broke on the inside and I can't figure out how to take off the end that hooks onto the lawn mower, because it's a weird squared off round connector that seems to require some special tool to take it off or something Here is a pic of something kind of similar although it doesn't have...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.