Ask Experts Questions for FREE Help !
Ask
    Josef_e's Avatar
    Josef_e Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 2, 2006, 06:27 AM
    Weedeater XT200 won't start
    I had to replace the fuel lines on my weeteater XT200 but it still won't start. Replacing spark plug did not help. Any ideas?
    thebriggsdude's Avatar
    thebriggsdude Posts: 1,096, Reputation: 53
    Ultra Member
    		  
    #2

    Aug 2, 2006, 07:51 PM
    Did it run before?
    Sounds like (little tiny mesh screen in the carb) is clogged.. If its of some age... I'd rebuild the carb with gaskets and diapragm.
    Josef_e's Avatar
    Josef_e Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 3, 2006, 04:22 AM
    Yes it did run before (last year).
    Do you know where I can find some more detailed drawings of the carb?

    Thanks
    thebriggsdude's Avatar
    thebriggsdude Posts: 1,096, Reputation: 53
    Ultra Member
    		  
    #4

    Aug 3, 2006, 11:34 PM
    For the carb, I have no clue really of where... what seems to work for most when tearing them down is take pictures along the way for reference. If you have a small engine shop around you (a good one) they should be glad to help you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Help with Weedeater [ 5 Answers ]

Hello, I have a weedeater LT-7000, that has been giving me trouble lately, it runs real rough and wants to stall at full throttle, after cleaning the carb, muffler and port,and air filter,I recently discovered the fuel lines that run through the gas tank are broken inside the tank and I am not...

Featherlite XT200 [ 1 Answers ]

I have a broken spark plug in my weedeater and need to know how to change it. There is a hex type of bolt that needs to be unscrewed (it looks like) and wanting to know if a specific wrench can be purchased for this.

Stringing a weedeater [ 4 Answers ]

I borrowed a weed eater from a friend of mine, and it's one where you have to pull the spool off to load the string. How do I load the string back in so I can continue weedeating my yard? The string I'm using is the right string for the weed eater, I just don't have a clue how to go about getting...

Weedeater [ 4 Answers ]

I have a Weedeater model XT 20T. A month ago when it last worked the engine would konk out. I was able to finish the job after several restarts. Finally wouldn't start at all. I replaced the deteriated fuel line, put a new spark plug in it, used fresh gas, and cleaned the air filter. Still...

Vibrating weedeater [ 1 Answers ]

I have major vibration in by weedeater. After only afew minutes I have to let turn it off. I can't get any work done it feels like it is going to break into pieces

View more questions Search