 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
If you have three blades you will find 5 pulleys on the deck. One pulley on each blade axle, another stationary pulley and the then a spring loaded tensioner pulley. Put you belt around the outside of the blade pulleys in a big triangle, then around the inside of the stationary pulley. This breaks your triangle and now pull on the tensioner as hard as you can poull the spring. Peel the belt over the tensioner, when you re;lease it everything gets tight.
|
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Toro Lawn Mower Won't start
[ 7 Answers ]
This lawn mower was given to me and it ran last year. I replaced the spark plug. Replaced the gas. Replaced the pin and the gaskets in the carb. I'm getting spark from the plug. Its getting plenty of gas... maybe too much?? After several attempts at starting it I removed the plug and...
Toro push lawn mower will not start
[ 3 Answers ]
My Toro Lawn mower will not start. The starter cord will not pull. Please help! :mad:
How do I change the blade belt on Toro 12OVHO 6.5 HP GTS Mower
[ 1 Answers ]
I have a Toro 6.5 HP GTS lawn mower, model #12OVHO. The belt has slipped off. After removing the blade and the cover, what else do I need to remove or loosen to be able to put the belt back on the blade's flywheel?
Diagram for replacing lawn mower belt on Toro 1744HXL riding mower
[ 1 Answers ]
I need a diagram for replacing the belt in the mowing deck of a Toro 17-44HLX riding mower
View more questions Search
|
