 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Snapper 8 horse rider
I have a briggs 8 horse snapper riding mower that started once after setting for approx. 2 months.I try to start it now and the starter turns over but it does not start.It has a magnetron engine and I have put in a new plug and fresh gas even put gas in the cab and in the spark hold and it just cranks the starter.Can someone help?
|
||||
|
||||
|
Did you try to verify spark? My guess would be perhaps a safety interlock swicth is preventing spark? I am not familiar with the snapper, but I would guess the standard seat switch, mower engaged switch perhaps and a clucth position switch. I would either check all of these individually or verify that you do have good spark , either way.
Good LUck, Morrowrj |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I don't have the user manual for my snapper mower. Need to know what the sparkplug gap setting needs to be. Model SR928 10hp 28" cut Thanks, Roy
I made the usual error, I left gas in my mower over the winter. Then thinking I knew what I was doing I drained the old gas and refilled with fresh gas. BUT, not before I messed with the carb settings on the 8HP tecumseh engine. Now the engine starts but has no power under load. It barely pulls me...
My rear riding snapper mower pull is not working. The string comes all the way out and does not retract. I have taken the top off and using the same spring tried to put back together properly. It seems as though there is no tension to pull the string back in. Please help me to get the tension back!
How do I identify which engine I have on my Snapper rear-engine rider? It's a model 30085 that I picked up for $20, and I need to replace a couple of things, but need to know what engine I have. Thanks for the help!
View more questions Search
|
