Ask Experts Questions for FREE Help !
Ask
    kenwwhite's Avatar
    kenwwhite Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 1, 2007, 08:43 AM
    Craftsman Lawn Tractor Mower Won't Engage
    I have a 18.5 HP Craftsman Lawn Tractor, model # 917.274811. It starts fine but the mower won't engage. The attachment clutch lever seems to have the same tension, and the drive belt seems fine. I've looked and can't see any obstructions. Any ideas?
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
    		  
    #2

    May 1, 2007, 10:49 PM
    It is a simple mechanism, clean the deck and levers WELL and see if idler (tensioner) is moving. The answer is there somewhere.

    Don
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Apr 30, 2008, 04:56 PM
    Remove the deck, clean, inspect, and lube where needed.
    trudger's Avatar
    trudger Posts: 3, Reputation: 1
    New Member
    		  
    #4

    May 5, 2008, 10:51 AM
    Comment on newaukumdon's post
    I had this problem and fixed it. I cleaned well and oiled all appropriate parts.
    trudger's Avatar
    trudger Posts: 3, Reputation: 1
    New Member
    		  
    #5

    May 5, 2008, 10:54 AM
    Don's advice is sound. I would also check that the engagement cable is moving freely when the handle is moved. Make sure both cable ends are attached. Clean cable well and manually move cable to make it move freely.
    happytrimmer's Avatar
    happytrimmer Posts: 1, Reputation: 1
    New Member
    		  
    #6

    May 26, 2010, 10:21 PM
    I had this happen to me. The tractor ran fine but no mower engagement. Blades were unimpaired, belt seemed to rotate fine. But, it turned out that the belt had slipped off one of the pulleys and this was luckily and easy fix. Hope this helps, Good Luck.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman Lawn Tractor [ 3 Answers ]

How much trouble is it to change the drive belt on a 15.5hp Sears Lawn Tractor? Seems like the speed of this lawn tractor has slowed down. I am assuming that the drive belt could possibly be stretched. Any onther ideas?

Replace cable to engage Craftsman 42" mower deck [ 1 Answers ]

How do I replace the mower engage cable on a 42" craftsman lawn mover deck?

Lawn tractor will not engage engine [ 1 Answers ]

The plastic gear on top of what I guess is the starter on model no.917-257631(craftsman 42') is worn down and Icannot find the part or part no. anywhere

Craftsman 20.0 electric start 42 inch automatic lawn tractor mower clutch [ 2 Answers ]

We have a Craftsman 20.0 hp electric start 42" mower automatic lawn tractor Model 917.270940 and it appears the cable that allows you to engage the blades has broken. How do you either fix this problem or do we need to purchase a new cable. If we need a new cable how is it installed... I need...

Craftsman 16.5 Lawn Tractor [ 1 Answers ]

I have recently replaced the mower clutch cable on my 16.5 HP Craftsman LT1000 lawn tractor with a 42" deck. After doing so, the transmission to the tractor will not engage. All the belts seem to be in place. I did not replace the clutch carriage bolt yet, as indicated by the instructions, after...

View more questions Search