Ask Experts Questions for FREE Help !
Ask
    cowboy022403's Avatar
    cowboy022403 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Apr 15, 2007, 05:04 PM
    12.5 horsepower brigg and strattion engine on a murray.
    I just recently put a 12.5 horsepower B&S engine on my murray mower. The original Brigg. 12.5 motor slung a rod. So I put this one on there. It's a little older engine.it has 1wires (one red one) coming out from under the flywheel. And the other one has 2 wires one red and one white. What are these wires ? It will not start from the switch, but it I put jumper cables to the starter it will start. Any Ideas of what to do with the wires or what they do. Or what my problem is . Thanks brandon


    The engine I put on the mower model number is 281707 Type0195-01 Code:89013111



    The engine I took off the mower that is blown model number is 286707 Type: 0152-01
    Code: 95041940
    Morrowrj's Avatar
    Morrowrj Posts: 345, Reputation: 22
    Full Member
    		  
    #2

    Apr 15, 2007, 06:40 PM
    Do you have a model number for the engine? Often they are found stamped into the plate by the exhaust side.


    Morrowrj
    cowboy022403's Avatar
    cowboy022403 Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Apr 15, 2007, 07:00 PM
    Quote Originally Posted by Morrowrj
    Do you have a model number for the engine? Often they are found stamped into the plate by the exhaust side.


    Morrowrj
    The engine I put on the mower model number is 281707 Type0195-01 Code:89013111
    This is the engine with only one wire.



    The engine I took off the mower that is blown model number is 286707 Type: 0152-01
    Code: 95041940
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is a1998 ford escort 2.0l 4 cyl. Engine a interference engine or not? [ 3 Answers ]

I broke my timing belt last week. I have a '98 Escort w/a 2.0L 4 cyl. Engine. The shop where it got towed to says that it's an interference engine. First off, I called my nephew in NH who has been a mechanic for the past 18 years & he said it's not an interference model. I then checked out The...

Removing engine on murray riding mower [ 1 Answers ]

I have a Murray riding mower. The engine was vibrating and it took me awhile but found two screws missing. I put two back in but engine still vibrate. Further investigation showed that the holes in the engine plate had reemed out and the screws were not holding the engine steady. My question: I...

Murray 12.5 Commercial Mower - Briggs Engine - Won't Start/Turn [ 3 Answers ]

So I'm mowing my back yard with my Murray lawn tractor. I brought it back to the garage and parked it, went inside to cool off, and when I went back out to put it back into the garage, it wouldn't start. I turned the key, and got nothing. The lights work, the battery is charged to 100%,...

1994 Civic - Check Engine "Orange" lamp and Engine revs when idling [ 1 Answers ]

Two questions realting to my Honda Civic ESI - 1994 model. 1) When I turn on the ignition key there is a Check Engine lamp displayed in Orange which is remaining On for progressively longer. Car not be started until this light disappears. Eventually after 3-5 seconds light turns off and engine...

NEED HELP Replacing engine stop/control cable on Murray Lawnmower [ 1 Answers ]

THe cable broke on the inside and I can't figure out how to take off the end that hooks onto the lawn mower, because it's a weird squared off round connector that seems to require some special tool to take it off or something Here is a pic of something kind of similar although it doesn't have...

View more questions Search