Ask Experts Questions for FREE Help !
Ask
    mowerhelpneeded's Avatar
    mowerhelpneeded Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 12, 2009, 08:40 PM
    Fuse blows
    I have a craftsman 25hp 48in cut the fuse blows after the clutch has been engaged. Sometimes right after, sometimes a few minutes will pass before it blows... Any suggestions?
    reaume's Avatar
    reaume Posts: 2, Reputation: 1
    New Member
    		  
    #2

    May 12, 2009, 09:07 PM
    Check out how many Amps is your fuse... might need a 25 Amps to use that
    21boat's Avatar
    21boat Posts: 2,441, Reputation: 212
    Ultra Member
    		  
    #3

    May 12, 2009, 10:36 PM

    Don't change the fuses Amp size that's already there if its an orginial fuse. A fuse is gaged to the wire its on so wire doesn't melt.

    Need to check safety switches grounds and the wire itself not being grounded.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat fuse blows frequently [ 1 Answers ]

I have a Bryant furnace, approx. 5 yrs old (electric) and the fuse for the thermostat keeps blowing when replace, and advice on what this might be?

My furnace blows the fuse [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can see...

Microwave blows a fuse [ 21 Answers ]

Every time we use our microwave it blows the fuse after about 30 to 45 seconds max. We have a Sharp Carousel R426. It's plugged into a GFCI receptacle that is the only receptacle on a 15 Amp breaker. Do I need a 20 Amp breaker for the microwave? Is there something that could be wrong with this...

Fuse blows [ 10 Answers ]

As soon as I turn the key to the on position the 30 amp fuse blows. I have a Craftsman 12.5 lawn tractor. The battery is new. I'm not sure what's wrong. Thanks for any advice. Jeff C.

View more questions Search