Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Old Murray riding mower
[ 8 Answers ]
I bought an old Murray riding mower last year. I'm not sure what year it is, but here is my problem: One of the rear tires has a flat, instead of loading up the whole mower in the back of the truck, I wouldm like to remove the wheel. I removed the holding pin and the washer from the outside of the...
Slow riding mower even after replacing the drive belt
[ 1 Answers ]
Hello, my 42" riding mower (Poulan) was progressively getting slow and slower. About 1 hear ago I replaced the drive belt. I just pulled it out to do the 1st mow down here in Texas. After 1 or 2 times around the yard, I was moving at a snails pace. Today, I replaced the drive belt. That didn't fix...
Murray Riding Mower
[ 1 Answers ]
I bought a used Murray riding mower with a 40" deck. I want to add a mulching kit but can't seem to find one. Does anyone know if there are any interchangeable parts that will fit this mower?
Murray Riding Mower
[ 1 Answers ]
I have a murray riding mower that I purchased in August of 1991. Apparently I need a new transaxle because it will not go in gear at all. The part # in the book is Dana model 4450-1 which I have been unable to locate, the only reference I have come across for the part says that it has been... View more questions Search
|