Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Briggs & stratton 12.5
[ 8 Answers ]
My husband has an MTD with a b and s 12.5. It has run weill with some babying for a while, now. One day he was running ti and he heard a loud POP , and that was the end. It has new solenoid, starter, bettery and a few other things . The key is it is GETTING gas into the bowl, but not going ...
Briggs & Stratton 14.5hp OHV - Won't Run
[ 8 Answers ]
I have a yard machine mower that was running great. It shut off in the middle of cutting and that was that. If I pour gas in the carb it tries to start, so I know I have fire. I have plenty of gas going to the carb and the solenoid on the bottom is working fine. I had the carb off, took the main...
Briggs & Stratton 12.5 hp issues continue... Can anybody help?
[ 11 Answers ]
I've been struggling with problems with my 12.5 b&s vertical shaft motor. It ran low on oil a while back, it never seized... but it did stop from the friction. I simply took the head off & lubed the cylinder wall with oil & worked the piston by hand via the flywheel. I put the head back on & then...
Briggs &stratton 15 hp.
[ 1 Answers ]
The other day this engine just quit and I had no spark from the coil. It has the electronic ignition so I cleaned everything under the flywheel and put it back thinking that this must be the problem but no. There is a small wire that goes to the coil and when I pull it off it will fire. I found two...
Briggs & stratton 16hp
[ 1 Answers ]
Hi, I have a Cub Cadet which had a 16hp BS motor with points. It went bad so I found another 16hp BS that does not have points, it has the magnetron ignition. I am having trouble getting it to fire, is there something that I need to change to the wiring to make it fire. The magnetron engine came... View more questions Search
|