Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How can I line up the auger and shaft horizontally to replace the shear pin?
[ 5 Answers ]
I snapped the shear pin on the left auger of my snowblower. I have no trouble lining the auger and the shaft. My problem is that when they are aligned rotationally, the holes are off slightly horizontally. Enough that I cannot get the remainder of the pin out. There is no play in the auger at all....
Craftsmen snowblower won't start
[ 1 Answers ]
I have the 5.5hp with electric start... it tries like heck to turn over but won't grab. I am getting spark. I have even taken the plug (which is str8 up) and given a quick shot of carb cleaner and replugged... she fired right up ! So obviously it is not getting fuel (priming makes no difference...
Snowblower auger coming loose
[ 1 Answers ]
My Craftsman 5 HP snow blower has a problem where the auger shaft has come off the auger bearings (the plastic pieces where the auger shaft fit into and are attached to the auger housing). Has anyone had this problem? Do you bang away on the auger housing until it gets narrow enough to hold the...
Craftsmen Auger Blade bent 24'
[ 1 Answers ]
Hi all, I am an old Snow blower C950-52109-0 , I have bent the blade on the LH auger. I have taken the 6 screws out on both sides. No luck. How do I replace the blade. Eveything else works OK. Please help Snow storm tomorrow and day after Vivek:)
Snowblower auger belt issue
[ 2 Answers ]
I just put on a new belt on the snowblower and now it flips over when engaging the auger and burns. What is wrong? View more questions Search
|