Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Murray 12.5 won't start
[ 2 Answers ]
I have switched out the sillenoid in my murray 12.5 hp riding mower and it will not start. It tries when you touch the points on the sillenoid but it won't completely turn over. What could be wrong?
Murray won't start again.
[ 6 Answers ]
Last weekend I was mowing the lawn everything going perfect then I got into deeper grass and the mower died. I disengaged the mower blade, put it in nutural and tried to start it. NOTHING!! No lights, no click sound nothing. I pushed it back into the garage located a fuse which was fine the casing...
Murray won't start
[ 1 Answers ]
My solenoid shelled on my murray rider so I replaced it. I have a new battery but when I try to start it, it has a click at the solenoid. The power gets to the lights, but nothing to the engine. What can I do to get the engine to turn over?
Murray won't start
[ 1 Answers ]
My murray caught on fire last year from loose fuel line, but not badly damaged. I have replaced all burnt parts (fuel line, fuel and air filter, belts, muffler, and plug). I inspected all wires and found only 2 burnt completely: a yellow wire from start switch/coil, and black wire from sp. Plug....
Murray 5.0 won't start
[ 2 Answers ]
My Murray 5.0 push lawnmower won't start. It briefly started and when I started to mow, it cut off. This happened a couple of months ago so I checked the air filter and basically knocked all the dirt out and it started like it was brand new. Now it's won't start again. I knocked the dirt out of... View more questions Search
|