Ask Experts Questions for FREE Help !
Ask
    lovintoyfarmin's Avatar
    lovintoyfarmin Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jun 6, 2007, 09:55 PM
    Sears/Craftsman V-Belt applications
    I was given an assortment of new, in the package V-Belts for Sears/Craftsman tractors. Is there a reference available some place to tell what tractors these belts will fit? They have the part #'s on them but the Sears site has nothing on them that I can find.
    Bonnie
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jun 7, 2007, 07:25 AM
    The reference charts I've used are the reverse of what you need. If I know the tractor the chart tells me the belt, not the other way around. Those belts may say Craftman but they will fit tons of other brands and not just tractors. One of those Sears belts is on my table saw right now. Wish I could help more. Are you trying to sell these belts or something?
    lovintoyfarmin's Avatar
    lovintoyfarmin Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jun 7, 2007, 03:56 PM
    Thank you for your input. Yes, we are trying to sell a lot of small engine parts including belts. We are retired and do this as a hobby. It goes along with collecting antique garden tractors and antique engines. If you'd like to see our homemade web site it is http://hometown.aol.com/briggsplanet/index.html.
    Bonnie
    Bailiff's Avatar
    Bailiff Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Jul 27, 2007, 10:37 AM
    I have sears lawn tractor w 22 hp engine belts are good,blades spin by hand freely. I put bpades in gear with handle blades do not engage what is the problem and how do I fix it
    Thanks
    John
    tlane's Avatar
    tlane Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Jan 1, 2008, 04:53 PM
    Do any of the blets have a part# of 22068, 11483 or 19230?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #6

    Jan 12, 2008, 06:58 AM
    There are several parts suppliers that have books available "catalogs" that if you have the belt number it will tell which tractors they fit. Try, stens, or Oregon.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sears Craftsman riding mower will not start [ 9 Answers ]

Sears Craftsman riding mower will not start. Not a click sound. Battery is good. I think the key switch is good. When I checked it has continuity when switched to ON. Where do I need to check next?

Sears Craftsman 11hp Lawn Tractor Transmission [ 3 Answers ]

My Sears Craftsman 11hp Lawn Tractor Model #917 254 270 :when engine is running and clutch is disengaged,it will not shift to another gear. You have to turn it off and move tractor back and forth before it will shift into another gear. Any ideas what's causing this and what to do about it? Or, is...

Diagram for replacing lawn mower belt on Sears Craftsman 4000 Riding Mower [ 9 Answers ]

I need a diagram on how to replace a belt on the Sears Craftsman II 4000 riding mower

Pully removal from a sears craftsman riding mower [ 1 Answers ]

Im trying to remove the pully from the transmission on a craftsman riding mower. Does anyone know if the pully or shaft has to be heated to remove? I've soaked it with wd40 and it still won't budge!

Sears Craftsman Lawn Tractor [ 4 Answers ]

I have a 10 HP Craftsman lawn tractor that will not move. The clutch works and it goes into gearbut the flat wheel spins and the gear wheel seems too have not enough pressure on it to move. Could this be just a loose drive belt? Thanks, Charlie

View more questions Search