The engine starts easily but will run only with partial choke and then unsteadily, switching erratically from two to four stroking It will not idle. If the choke is opened the engine two strokes well for a few seconds then cuts dead. The fuel lines are good, oil ratio is correct. Filter is the right one and clean. Problem is same cold or warm. The mixture screws are set as per the operators manual.

crigby

Hi,
First thing I would check is the tightness of the four screws attaching the reed plate to the crankcase. That is the roughly circular piece that the carb attaches to. They somtimes come loose. I will attach the parts breakdown.
Peace,
Clarke

Attached Images

RYOBI-310bvr.pdf (247.5 KB, 20 views)