Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Lawn Mower Catcher Problem
[ 10 Answers ]
For the last few weeks I have enoticed that the grass is not flowing back into the catcher properly - it builds up at the entrance of the catcher and then doesn't fill properly. I have cleaned it to ensure airflow is not blocked. Appreciate any tips before taking it into the repair centre.
Muray mower wiring problem
[ 4 Answers ]
I have a Murray mower date code 0184 with a 12.5 Briggs. I can't find any wiring schematics. The ignition switch was bad and the terminals were corroded. My son had removed the solenoid to use on another mower. I put it back but am not sure it's right. The yellow kill switch wire from the seat has...
Ride on mower engine problem
[ 3 Answers ]
Hi, I have a ride on Snapper mower powered by a 14HP Briggs & Stratton engine. Model 287707, Type 023501 Code 9601084A I can start the engine with the choke engaged and it will run. But when I take it off choke the engine stalls. Do you have any idea what the possible causes could be....
Riding Mower Problem
[ 1 Answers ]
My son has an old Lawn Chief riding mower that he purchased used. I finally got it started, but had to do so by shorting out the solenoid with a screwdriver to get it to turn over. Are any manuals available for these lawn mowers? The other idea I had was to put in a heavy duty push button...
"Minor" starter problem
[ 2 Answers ]
A few days ago, when I went to a shop to get my compression measured (on a Civic '90 DX), the guys told me my starter is spinning a bit too slow. On a side note, it takes at least 4-5 rotates to start the engine... something like "cg-cg-cg-cg-WOOOM". Now I'm wondering if this is something I could... View more questions Search
|